Your Last Coat™ is Exactly the Same with the Three Other Top Coats - AsbestoSafe®, LeadLock™, & RoofCoat™. These are Labeled According to Our Clients Needs in Worldwide Markets We are Serving & Customers Request for Discretion.

The Picture Above is from Global ENCASEMENT's Inc. Case History #207 The Rainbow Dam, Which Needed Severe Protection from the Extreme Montana Elements. The Chosen System for this Task was a Combination System Design of R.I.P™ Rust-Inhibiting Primer & Your Last Coat™.

1. Product Name

Your Last Coat™ aka AsbestoSafe®, LeadLock™, RoofCoat™

2. Manufacturer

Global ENCASEMENT, Inc.
701 E. Santa Clara Street
Ventura, CA 93001 USA
PHONE: (800) 266-3982
FAX: (800) 520-3291
EMAIL: service@encasement.com
www.encasement.com

3. Product Description

Your Last Coat™ is a High Performance, Water-Based, Acrylic, Elastomeric Topcoat, Non-Toxic, Zero VOC Green Coating that is Tough, Abuse , Rust , Mildew, Fire & Chemical-Resistant & Forms a Waterproofing Membrane. Its Moisture Vapor Transmission Qualities Make it Perfect for Historic Preservation.

Uses: Over Most interior or Exterior Surfaces - Wood, Plaster, Stucco, Masonry, Concrete, Metal, Structural Steel, Transite, Galbestos, Wood or Asphalt Roofing Shingles, Built-up Roofing, Fiberglass, Vermiculite & Ceramic Fiber.

Use it to Seal & Encase Roofing, Asbestos-Containing Materials (ACM), Lead-Based Paint (LBP), Walls, Ceilings, Trim, Ducts, Pipes, Siding, Window Trim, Porch Railings, Posts, Overhangs, Fences, & Transite.

Your Last Coat™ GREEN Features:

Your Last Coat™ PERFORMANCE Features:

4. Technical Data & Properties

Solids by weight:             66% (+/- 2%)
Solids by volume:            52% (+/- 2%)
Weight per gallon:          11.85 lbs
VOC:                                       Zero
Liquid appearance:        Bright White with Mild Scent
Viscosity:                            110 +/-10 KU
Drying time:                     To Touch: 1-4 hours
                                          Recoat After Dry To Touch: 2-8 hours
                                          Full Cure: 10-14 days

Your Last Coat™ has an Elongation of 329% & a Tensile Strength of 304 Psi, Superior Flexibility, High Impact Resistance & Adhesion All Tested in Accordance with (ASTM D 6083) Standard Testing Protocol for Liquid Applied Roofing Systems.

5. Product Installation

COVERAGE:
Your Last Coat™ Coverage Rate Varies Depending Upon the Porosity & Texture of the Surface Being Encased.
Theoretical Coverage on a Flat Non-Porous Surface is:

Interior System = 7 mil DFT @ 137 sq. ft./gallon (12.72 sqm)
Exterior System = 14 mil DFT @ 68 sq. ft./gallon (6.31 sqm

On Roofing:
10-Year System = 16 mil DFT @ 60 sq. ft./gallon (5.57 sqm)
20-Year System = 32 mil DFT @ 30 sq. ft./gallon (2.78 sqm)
*DFT: Dry Film Thickness

Spray Application: Use Self-Cleaning Reversible Spray Tip Size .019-.035 (.021 is most often used).

Brush: Use Any Nylon Bristle Brushes.
Roller: Use a ¾ Inch Nap.

6. Availability and Cost

Call Global ENCASEMENT, Inc. at 800-266-3982 for Pricing & Availability.

7. Warranty

Global ENCASEMENT, Inc. can Warrant for a Period of up to Twenty (20) Years from the Date of Purchase that Your Last Coat™ is Free of Any Defects in Manufacturing. The Limited Warranty Herein Described Shall be in Lieu of Any Other Warranty, Expressed or Implied, Including but Not Limited to the Implied Warranties of Merchantability & Fitness for a Particular Purpose.

Global ENCASEMENT's Sole Liability Under this Limited Warranty shall be, at its Option, to Replace Any Portion of the Product Proven to be Defective in Manufacture.

Any Defects Discovered Must be Reported to Global ENCASEMENT, Inc. Within the Limited Warranty Period, & No Later than 30 Days After Discovery.

This Limited Warranty does not Extend to Liability for Any Damages Due to Abuse by Occupants, Improper Maintenance, Water Damage, or Any Other Causes Beyond Anticipated Conditions & the Manufacturer's Control.

Download and Print
PDS (Product Description Sheet) & SDS (Safety Data Sheets)