LeadLock - Lead Encapsulating Paint

Lead Encapsulating Paint Abatement Project

All projects & their Challenges are Different & their Solutions Should be Handled on a Case by Case Basis. In the Pictures Above from GEI Case History #204 the LeadLock™ System Design was a Combination of R.I.P.™ Rust Inhibiting Primer, PrepLESS Primer™ & LeadLock™ Topcoat. This LeadLock™ System Dealt with Rust, Pealing Lead-Based Paint & Waterproofing the Building All at the Same Time.

1. Product Name

LeadLock™ - Lead Encapsulating Paint

2. Manufacturer

701 E. Santa Clara Street
Ventura, CA 93001 USA
PHONE: (800) 266-3982
FAX: (800) 520-3291

3. Product Description

LeadLock™ - Lead Encapsulating Paint is a High-Performance, Water-Based, Acrylic, Non-Toxic, Zero VOC Super Compliant Architectural Green Coating that is Tough, Abuse, Rust, Mildew, Fire & Chemical-Resistant & Forms a Waterproofing Membrane.

Its Moisture Vapor Transmission Qualities Make it Perfect for Historic Preservation. It can be Applied Over PrepLESS Primer™ to Form a Global ENCASEMENT, Inc. System.

LeadLock™ is Excellent for Interior or Exterior Use & is Suitable for Application Over Walls, Ceilings, Trim, Ducts, Pipes, Roofing & Siding, Windowsills, Frames & Trim, Porch Railings, Posts, Overhangs & Fences.

It Securely Seals & Encases Materials on Wood, Plaster, Stucco, Masonry, Concrete, Structural Steel, Transite, Shingles, Built-up Roofing, & Fiberglass or Ceramic Fiber.

LeadLock™ Lead Encapsulating Paint GREEN Features:

- Class A Fire Rated
​- Extremely Tough, Durable & Flexible
​- Mildew & Mold Resistant
​- Can be Custom Tinted Almost Any Color with a Minimum Order of 275 Per Batch.
​- Waterproof
​- Flexible
- ​Zero VOCs (Volatile Organic Content)

4. Technical Data & Properties

Solids by weight:              66% (+/- 2%)
Solids by volume:            52% (+/- 2%)
Weight per gallon:          11.85 lbs
VOC:                                       Zero
Liquid appearance:         Bright white with mild scent
Viscosity:                              110 +/- 10 KU
Drying time:                        To Touch: 1-4 hours
                                           Recoat After Dry To Touch: 2-8 hours
                                           Full Cure: 10-14 days

D.L. Laboratories Toxicological Report States: "There is No Toxicological Basis for Limiting Occupancy of a Dwelling Unit, or Restricting Entry of Any Resident Including Pregnant Women & Children Under Six Years of Age, to Dwelling Units During the Application of your Encapsulant."

5. Product Installation

- LeadLock™ Lead Encapsulating Paint is ready to use.
​- Apply by brush or roller, or airless sprayer.
​- All surfaces must be clean, dry, and free of mold, mildew, chalking, dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
​- Best applied in temperatures between 50ºF and 100ºF.
​- Dries in 2-8 hours. Cool temperatures and high humidity can affect dry and cure time.
​- Follow manufacturer’s application guidelines.
​- Easy to use and clean up is with water.


LeadLock™ coverage rate      Interior System = 7 mil DFT @ 137 sq. ft./gallon (12.72 sqm)
on a flat surface is:                     Exterior System = 14 mil DFT @ 68 sq. ft./gallon (6.31 sqm) 
                                                              *DFT: Dry Film Thickness
Product                                            Wet Mils                            Dry Mils
                                                                    14                                           7
LeadLock™                                           27                                         14

Coverage Varies Depending Upon the Porosity & Texture of the Surface Being Encased.

Spray Application: Use Self-Cleaning Reversible Spray Tip Zize .019-.035 (.021 is most often used).

Brush: Use Any Nylon Bristle Brushes.
Roller: Use a ¾ Inch Nap.

6. Availability & Cost

Call Global ENCASEMENT, Inc. at 1-800-266-3982 for Pricing & Availability.

7. Warranty

Global ENCASEMENT, Inc. can Warrant for a Period of up to Twenty (20) Years from the Date of Purchase that LeadLock™ is Free of Any Defects in Manufacturing. The Limited Warranty Herein Described Shall be in Lieu of Any Other Warranty, Expressed or Implied, Including but not Limited to the Implied Warranties of Merchantability & Fitness for a Particular Purpose.

Global ENCASEMENT, Inc.'s Sole Liability Under this Limited Warranty Shall be, at its Option, to Replace Any Portion of the Product Proven to be Defective in Manufacture.

Any Defects Discovered must be Reported to Global ENCASEMENT, Inc. Within the Limited Warranty Period, & no Later than 30 Days After Discovery.

This Limited Warranty does not Extend to Liability for Any Damages Due to Abuse by Occupants, Improper Maintenance, Water Damage, or Any Other Causes Beyond Anticipated Conditions & the Manufacturer's Control.

Download & Print
PDS (Product Description Sheet) & SDS (Safety Data Sheets)

Download PDS (PDF) Product Description Sheets
Download SDS (PDF) Safety Data Sheets