All projects and their challenges are different and their solutions should be handled on a case by case basis. In the pictures above from GEI case history #204 the LeadLock™ system design was a combination of R.I.P.™ Rust Inhibiting Primer, PrepLESS Primer™ and LeadLock™ Topcoat. This LeadLock™ system dealt with rust, pealing Lead Base Paint and waterproofing the building all at the same time.
1. Product Name
3. Product Description
LeadLock™ is a high performance, water-based, acrylic, non-toxic, zero VOC super compliant architectural green coating that is tough, abuse-, rust-, mildew-, fire- and chemical-resistant and forms a waterproofing membrane. Its moisture vapor transmission qualities make it perfect for historic preservation and can be custom tinted almost any color. It can be applied over PrepLESS Primer™ to form a GLOBAL Encasement, Inc. System.
Class A Fire Rated
Extremely Tough, Durable and Flexible
Mildew and Mold Resistant
Can be Custom Tinted Almost any Color
Zero VOCs (Volatile Organic Content)
4. Technical Data and Properties
Solids by weight:
Solids by volume:
Weight per gallon:
66% (+/- 2%)
52% (+/- 2%)
Bright white with mild scent
110 +/- 10 KU
To Touch: 1-4 hours
Recoat After Dry To Touch: 2-8 hours
Full Cure: 10-14 days
5. Product Installation
- LeadLock™ is ready to use.
- DO NOT DILUTE. PROTECT FROM FREEZING.
- Apply by brush or roller, or airless sprayer.
- All surfaces must be clean, dry, and free of mold, mildew, chalking, dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
- Best applied in temperatures between 50ºF and 100ºF.
- Dries in 2-8 hours. Cool temperatures and high humidity can affect dry and cure time.
- Follow manufacturer’s application guidelines.
- Easy to use and clean up is with water.
LeadLock™ coverage rate on a flat surface is:
Interior System = 7 mil DFT @ 137 sq. ft./gallon (12.72 sqm)
Exterior System = 14 mil DFT @ 68 sq. ft./gallon (6.31 sqm)
*DFT: Dry Film Thickness
6. Availability and Cost
GLOBAL Encasement, Inc. can warrant for a period of up to twenty (20) years from the date of purchase that LeadLock™ is free of any defects in manufacturing. The Limited Warranty herein described shall be in lieu of any other warranty, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.
GLOBAL Encasement, Inc.'s sole liability under this Limited Warranty shall be, at its option, to replace any portion of the product proven to be defective in manufacture.
Any defects discovered must be reported to GLOBAL Encasement, Inc. within the Limited Warranty period, and no later than 30 days after discovery.