Logo
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
mpe

MPE™ Multi-Penetrating Encapsulant

$224.99/5 gallon pail

MPE Multi-Penetrating Encapsulant is a clear acrylic, water-based, non-toxic, non-flammable, zero VOC, primer, sealer and conditioner for fibrous, porous, Asbestos-Containing Materials (ACM) and for surfaces that can be only marginally cleaned or are difficult to adhere to.

MPEMulti-Penetrating Encapsulant functions as a penetrating encapsulant and primer where tenacious adhesion is needed to safely lock down fibrous and asbestos containing surfaces. MPE™ is designed and engineered to deeply penetrate asbestos-containing materials.

Call GLOBAL Encasement, Inc. at 800-266-3982 for pricing and availability.

Available Package Sizes: 5 gallon pail, 55 gallon drum & 275 gallon tote

  • Fluffy or cementitious sprayed on fireproofing
  • Decorative and acoustical plaster on ceilings and walls
  • Insulation on pipes, boilers, tanks and ducts
  • Transite siding and roofing
  • Galbestos
  • Mineral cap sheet
  • Asphalt BUR, modified bitumen
  • Concrete
  • Fiberglass
  • Floor tiles
  • Textiles and other fibrous materials
  • Floor adhesives and mastic

    Solids by weight: 25.2% (+/- 2%)
    Solids by volume: 24% (+/- 2%)
    Weight per gallon: 8.55 lbs
    VOC: Zero
    Liquid appearance: Milky white
    Dried appearance: Clear
    Drying time: ½ to 24 hours (depends on dilution, air temperature and humidity)
    Clean up: Water

    • MPEMulti-Penetrating Encapsulant is ready to use.
    • PROTECT FROM FREEZING.
    • Apply by brush or roller, or airless sprayer.
    • All surfaces must be clean, dry, and free of mold, mildew, chalking, dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
    • Best applied in temperatures between 50ºF and 100ºF.
    • Apply only when weather conditions will permit drying before rain, dew or freezing temperatures.
    • Cool temperatures and high humidity retard cure.
    • Follow manufacturer’s application guidelines.
    • Easy to use and clean up is with water.

    MPE Multi-Penetrating Encapsulant should be applied and allowed to dry thoroughly before applying topcoats. In no case should topcoats be applied until MPE™ is completely dry. Topcoat with GLOBAL Encasement, Inc. materials.

    COVERAGE:
    MPE Multi-Penetrating Encapsulant coverage rate on a flat surface is 200 sf/gallon (18.58 sqm) and will yield 4 mils DFT (Dry Film Thickness). Coverage rate may vary depending upon porosity, texture of the surface being encased and mil thickness desired.

    Spray Application: Use self-cleaning reversible spray tip, Size .015 – .019

    MPE Multi-Penetrating Encapsulant is ready to use and should not be diluted for transite applications.

    It can be diluted with water for the following applications:

    Pre-Removal Surfactant Dilute 10:1
    Amended water for wet-out prior to abatement

    Lockdown Encapsulant Dilute 6:1
    For use as a post-removal encapsulant and as a misting agent prior to air monitoring

      Unless GLOBAL Encasement, Inc. product provides a written warranty of fitness for a particular use, GLOBAL Encasement’s sole warranty is that the product, as supplied, will meet the current sales specifications and is specific only to return of product found to be defective upon opening of container, within one year from date of purchase.  Customer’s exclusive remedy and GLOBAL Encasement, Inc.’s liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted and GLOBAL Encasement, Inc. expressly disclaims any liability for incidental or consequential damages.

      Related Products

      asbestos safe

      Asbestos Safe®

      Simple Encapsulation Turning Asbestos Safe

      Your Last Coat™

      Your Last Coat ™

      Green Top Coat That Does It All

      Lead-Lock

      LeadLock™

      Safely Encapsulate Lead Paint With In Place Abatement

      Roof Coat™

      RoofCoat®

      Restore for a Fraction of the Cost – No Waste Creation