AsbestoSafe® – Asbestos Encapsulation Paint
$264.99/5 gallon pail
AsbestoSafe® – Asbestos Encapsulation Paint is a high performance, water-based, acrylic, non-toxic, tough, abuse, rust-, mildew, fire and chemical resistant, non-mercuric, zero VOC coating that forms a waterproofing membrane. It can be applied over PrepLESS Primer™ to form an AsbestoSafe® GLOBAL Encasement, Inc. System for management-in-place of Asbestos-Containing Materials.
AsbestoSafe® is excellent for interior or exterior use and is suitable for application over most surfaces, walls, ceilings, ducts, pipes and roofing. It functions as a bridging encapsulant that securely and safely seals and encases hazardous fibrous materials on plaster, structural steel, Transite, Galbestos and various other fibrous materials including fiberglass, vermiculite or ceramic fiber.
Call GLOBAL Encasement, Inc. at 800-266-3982 for pricing and availability.
Available Package Sizes: 5 gallon pail, 55 gallon drum & 275 gallon tote
AsbestoSafe® GREEN Features:
- Class A fire-rated
- Does not affect the fireproof rating of the building
- Extremely tough and durable
- Mildew and mold resistant
- Can be custom tinted
Solids by weight: 66% (+/- 2%)
Solids by volume: 52% (+/- 2%)
Weight per gallon: 11.85 lbs
Liquid appearance: Bright white with mild scent
Viscosity: 110 +/-10 KU
Drying time: To Touch: 1-4 hours
Recoat After Dry To Touch: 2-8 hours
Full Cure: 10-14 days
AsbestoSafe® has an elongation of 329% and a tensile strength of 200 psi (ASTM D412), superior flexibility (ASTM D522,A), high impact resistance (ASTM D2794), and adhesion (ASTM E736). This Material is a UL listed roofing/waterproofing coating, has passed E-108 (comparable to U.B.C. St’d 32-7) and meets the requirement for Class A. AsbestoSafe® is a Class “A” Fire Rated Material and has passed ASTM E-119 testing over fireproofing insulation, ASTM E-84, E-162, and QUV G53.
This material has also passed European Standards Testing EN 13823 Reaction to fire tests for building products and EN ISO 11925-2 Reaction of fire tests – Ignitability of building products subjected to direct impingement of flame.
- AsbestoSafe® is ready to use.
- DO NOT DILUTE. PROTECT FROM FREEZING.
- Apply by brush or roller, or airless sprayer.
- All surfaces must be clean, dry, and free of dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
- Best applied in temperatures between 50ºF and 100ºF.
- Dries in 2-4 hours. Cool temperatures and high humidity can affect dry and cure time.
- Follow manufacturer’s application guidelines.
- Easy to use and clean up is with water.
Coverage varies depending upon the porosity and texture of the surface being encased.
Spray Application: Use self-cleaning reversible spray tip size .019-.035 (.021 is most often used).
Brush: Use any nylon bristle brushes.
Roller: Use a ¾ inch nap.
GLOBAL Encasement, Inc. can warrant for a period of up to twenty (20) years from the date of purchase that AsbestoSafe® TopCoat is free of any defects in manufacturing. The Limited Warranty herein described shall be in lieu of any other warranty, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.
GLOBAL Encasement’s sole liability under this Limited Warranty shall be, at its option, to replace any portion of the product proven to be defective in manufacture.
Any defects discovered must be reported to GLOBAL Encasement, Inc. within the Limited Warranty period, and no later than 30 days after discovery.
This Limited Warranty does not extend to liability for any damages due to abuse by occupants, improper maintenance, water damage, or any other causes beyond anticipated conditions and the manufacturer’s control.
Simple Encapsulation Turning Asbestos Safe
Your Last Coat ™
Green Top Coat That Does It All
Safely Encapsulate Lead Paint With In Place Abatement
Restore for a Fraction of the Cost – No Waste Creation