- About Us
- About Encasement
- Case Histories
- Contact Us
While the use of GLOBAL Encasement, Inc. products require minimal surface preparation, mold, mildew, calcimine (efflorescence), chalking and rust must be addressed prior to the application of the primers and/or topcoat.
Mold, mildew (fungi)
GLOBAL Encasement, Inc. manufactures products that can help get rid of mold and mildew.
Generally this condition is caused by leakage over concrete surfaces causing hydrostatic pressure to force the salts (calcimine) out.
Treatment: Repair the leaks and use a wash of mineral scale remover to clean the surface prior to using our Primers and TopCoats.
Treatment: There are three methods to address chalking:
A Water-based rust inhibiting acrylic primer to be applied over ferrous metal surfaces. Suitable for interior or exterior use over metal roof decks, window frames, metal sidewalls, rail cars, pipes and equipment, tank exteriors and structural steel. It is recommended for use with GLOBAL Encasement TopCoats.
An 80% solids, premium quality, water-based, elastomeric, non-flammable acrylic caulk that contains no solvents. It is excellent for interior or exterior use. Suitable to bridge cracks, fill holes and feather ridges. Maintains outstanding performance characteristics for many years, remaining flexible, weather resistant and well adhered. Available in 3.5-gallon pails or 10 oz. Tubes (10 per case)
20 mils of gray elastomeric adhesive/sealant backed with spun bond polyester fabric, used for sealing seams. Immediate aggressive grip, full bond in 24 hours.
4" x 50' rolls (12 per case).
100% Polyester Fabric with outstanding physical strength properties, quick wet-out and saturation characteristics, unique elongation features and ease of handling and application for use with Global Encasement's coatings. 20" x 324' (other widths available)