Metal Roof Applied with RoofCoat™  Hangar Metal Roof after application of RoofCoat™

                                                                         Before                                                                                                         After


In the Past, Roofs had to be Torn off, Disposed of and Replaced when they Reached the End of their Short Life Cycle. Studies Show that 42% of the CO2 Emissions Causing Green House Gases, Contributing to Global Warming/Climate Change are coming from the Disposal and Storage of Unwanted Waste.

All that Discarded, Stored, Decomposing Material and Added Expense has Become Unnecessary. With GLOBAL Encasement Inc RoofCoat GREEN Systems Demonstrated on the Project in the Pictures Above, Case History # 184, Highlighted the Tremendous Cost Savings by Instead of Doing a Tear Off, Disposal and Replacement, the Existing Roof was Left in Place and Coated Over with a Twenty Year GLOBAL Encasement Inc. GREEN, Solar/Heat Reflective System. This system also has Tremendous Energy Savings as well as the added Cost Conserving Advantage of no Building Downtime and No Personnel Relocation Fees.
RoofCoat  Acrylic Roof Coatings

RoofCoat is a high solids acrylic topcoat. RoofCoatis used to preserve built-up roofing and flat roof systems. RoofCoat TopCoat creates a weather/waterproof durable and seamless elastomeric membrane for preserving existing roofing systems.  Application of RoofCoat Acrylic Roof Coating Systems replaces tear-offs/removal and disposal of existing roofing systems.  RoofCoat Acrylic Roof Coatings help to reduce the amount of roofing debris deposited in landfills.  With an estimated 40% of all CO2 emissions being generated from unwanted waste disposed of in landfills application of a RoofCoat Acrylic Roof Coating System will help reduce CO2 emissions while providing tremendous savings vs. removal and replacement of existing roofing systems.  RoofCoat Acrylic Roof Coating Systems have 83% solar reflectance which can help reduce facility cooling costs.  Help reduce the construction debris generated over the life of your building with a RoofCoat Acrylic Roof Coating System. The SCAQMD (Southern California Air Quality Management Distric) has determined that a large contributor to the smog levels found in and around cities like Los Angeles are created by the use of high VOC architectural coatings.  RoofCoatcontains zero VOC's or ODS's.  The widespread use of RoofCoat Acrylic Roof Coating Systems will result in cleaner air quality and reduced overall environmental impact of non-recyclable construction debris.



1. Product Name


2. Manufacturer

GLOBAL Encasement, Inc. 
701 E. Santa Clara Street, 
Ventura, CA  93001 USA
PHONE:  (800) 266-3982  
FAX: (800) 520-3291 

3. Product Description

RoofCoat is a Class A Fire Rated, UV Resistant, high performance, non-toxic, zero VOC, acrylic coating that forms a waterproof and seamless monolithic membrane. It results in an extremely tough, durable, flexible and renewable roof system that has 83% solar reflectance - for additional savings on indoor cooling costs.

RoofCoat is excellent for exterior use and is suitable for application over asphalt, single-ply, hypalon, PVC, metal, Transite and Galbestos roofing.

RoofCoat GREEN Features:

  • UL 790 Class A Rated
  • 83% Solar-Reflectance, UV Resistant
  • Extremely tough, durable and flexible
  • Non-Toxic, Non-Mercuric
  • Mildew and mold resistant
  • Can be custom tinted almost any color
  • Waterproof yet Breathable
  • Flexible
  • Zero V.O.C.s (Volatile Organic Content) 

4. Technical Data and Properties

Solids by weight:
Solids by volume:
Weight per gallon:
Liquid appearance:
Drying time:
66% (+/- 2%)
52% (+/- 2%)
11.85 lbs
Bright white with mild scent
110 +/-10 KU
To Touch: 1-4 hours
Recoat After Dry To Touch: 2-8 hours 
Full Cure: 10-14 days
RoofCoat has an elongation of 329% and a tensile strength of 304 psi, superior flexibility, high impact resistance and adhesion all tested in accordance with (ASTM D 6083) standard testing protocol for liquid applied roofing systems.

5. Product Installation

  • RoofCoat is ready to use.
  • Apply by brush or roller, or airless sprayer. 
  • All surfaces must be clean, dry, and free of mold, mildew, chalking, dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
  • Best applied in temperatures between 50ºF and 100ºF.
  • Dries in 2-8 hours.  Cool temperatures and high humidity can affect dry and cure time.  
  • Follow manufacturer’s application guidelines.
  • Easy to use and clean up is with water.
RoofCoat coverage rate on a flat surface is: 
10-Year System = 16 mil DFT @ 60 sq. ft./gallon (5.57 sqm)
20-Year System = 32 mil DFT @ 30 sq. ft./gallon (2.78 sqm)
 *DFT: Dry Film Thickness
Wet Mils
Dry Mils
Coverage varies depending upon the porosity and texture of the surface being encased, and the specific roofing system design.  Please refer to manufacturer’s application guidelines. 
Spray Application: Use self-cleaning reversible spray tip. Size .019-.035 (.021 is most often used). 
Brush: Use any nylon bristle brushes.
Roller: Use a ¾ inch nap.
6. Availability and Cost
Call GLOBAL Encasement, Inc. at  800-266-3982  for pricing and availability.

7. Warranty

GLOBAL Encasement, Inc. can warrant for a period of up to twenty (20) years from the date of purchase that RoofCoat of any defects in manufacturing. The Limited Warranty herein described shall be in lieu of any other warranty, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.
GLOBAL Encasement's sole liability under this Limited Warranty shall be, at its option, to replace any portion of the product proven to be defective in manufacture.
Any defects discovered must be reported to GLOBAL Encasement, Inc. within the Limited Warranty period, and no later than 30 days after discovery.
This Limited Warranty does not extend to liability for any damages due to abuse by occupants, improper maintenance, water damage, or any other causes beyond anticipated conditions and the manufacturer's control.
Download and Print
PDS (Product Description Sheet), MSDS (Material Safety Data Sheets)​ and SDS (Safety Data Sheets)






Your Last Coat is a  Green, Water-Based, Non-Toxic, Zero VOC Coating. It is Sustainable, Tough, Abuse, Rust, Mildew, Fire & Chemical-Resistant. It Forms a 20 Year Renewable, Water/Weather Proofing Membrane to Protect Buildings & Restore Roofing. It is Approved for Managing Asbestos, Lead-Based Paint & Solid PCB’s.






PrepLESS Primer - a super compliant architectural green coating primer-sealer-neutralizer that acts as a stabilizer for building surfaces that can be only marginally cleaned and where tenacious adhesion is needed.






MPE™ is a dilute-able, water thin, non toxic, easily applied, water-based penetrating encapsulant used for pre and post removal. It is used in minimizing exposure during disaster clean up, hazardous material removal and helping control all dust and debris.






R.I.P.  is an environmentally sound, water-based Rust Inhibiting Primer to be used over ferrous metal surfaces. Employing the latest breakthroughs in water-based acrylic technology, it can even be applied over properly prepared rusted surfaces, with excellent resistance to flash rusting.





PremeClean Industrial Cleaner is a highly effective, water-soluble, and versatile cleaner concentrate.





Environmental Attributes