R.I.P.™ Rust Inhibiting Primer

   

 

Rail Bridge During Application of R.I.P. Rust-Inhibiting Primer

 

Product Description

R.I.P.  is an environmentally sound, water-based Rust Inhibiting Primer to be used over ferrous metal surfaces.  Employing the latest breakthroughs in water-based acrylic technology, it can even be applied over properly prepared rusted surfaces, with excellent resistance to flash rusting.
 

R.I.P. Features:

  • Excellent for interior or exterior use
  • Easy to use
  • Halts oxidation and corrosion of metal surfaces
  • Temperature resistant to 235ºF (continuous)
  • Excellent stain blocker
 
R.I.P. is excellent for interior and exterior use and is suitable for application over metal window frames, metal sidewalls, rail cars, pipes and equipment, tank exteriors and structural steel.
Acting also as a primer, once the R.I.P. is applied the surface is ready to receive any of GLOBAL Encasement, Inc.’s TopCoats.

Technical Data and Properties

Solids by weight:
Solids by volume:
Weight per gallon:
VOC:
Liquid appearance:
Viscosity:
pH:
Drying time @ 75ºF:
Clean up:
51.3% (+/- 2%)
40% (+/- 2%)
10.24 lbs
100 g/l
Color will vary
85-95 KU
9-10
2 hours 
Warm, soapy water
 
 
 
 
 
 
 
 
 
 
This non-toxic, water base product conforms to the minimum VOC requirements set forth by all California Counties. 
This product conforms to Green Seal GS--03.

Product Installation

  • R.I.P.  is ready to use or can be thinned (water, no more than 5%).
  • PROTECT FROM FREEZING.
  • Apply by brush or roller, or airless sprayer.
  • All surfaces must be clean, dry, and free of dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
  • Apply in temperatures above 45ºF and where the surface temperature is more than 5ºF above the dew point.
  • Cool temperatures and high humidity can affect dry and cure time.  
  • When the surface temperature is low and the air temperature is high, adhere strictly to application thickness of no more than 3 dry mils (to prevent surface skinning and possible blistering).
  • Follow manufacturer’s application guidelines.
  • Easy to use and clean up is with water.
 
COVERAGE:
The calculated coverage rate on a flat surface is: 3 mil DFT @ 192 sf/gallon   
 
R.I.P. may be brushed, rolled or spray applied.  The coverage varies depending on porosity, mil thickness, and texture of the surface being covered.  A recommended thickness of 2-3 mils is for properly prepared light rust, 4-6 mils is for properly prepared heavy rust.  
 
Spray Application: Use self-cleaning reversible spray tip Size .017-.021.
 
Brush:  Use any nylon bristle brushes.
 
Availability and Cost
 
Call GLOBAL Encasement, Inc. at  800-266-3982  for pricing and availability.
 
Warranty
 
GLOBAL Encasement, Inc. can warrant for a period of up to twenty (20) years from the date of purchase that R.I.P. Rust Inhibiting Primer is free of any defects in manufacturing. The Limited Warranty herein described shall be in lieu of any other warranty, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.
 
GLOBAL Encasement's sole liability under this Limited Warranty shall be, at its option, to replace any portion of the product proven to be defective in manufacture.
 
Any defects discovered must be reported to GLOBAL Encasement, Inc. within the Limited Warranty period, and no later than 30 days after discovery.
 
This Limited Warranty does not extend to liability for any damages due to abuse by occupants, improper maintenance, water damage, or any other causes beyond anticipated conditions and the manufacturer's control.
 
Download and Print
PDS and MSDS
 
 
Manufacturer
 
GLOBAL Encasement, Inc.
701 E Santa Clara Street
Ventura, CA  93001 USA
PHONE:  (800) 266-3982  
FAX: (800) 520-3291