Clear Coat™

 

 

Brick wall After application of  PrepLESS Primerand Clear Coat

 
 

Product Description

 
Clear Coat is a high quality, acrylic, water-based, low VOC (100 g/l) clear decorative surface coating to be used on just about any surface, including encased VAT (Vinyl Asbestos Tile), Lead-Based Paint or PVC. It forms a durable, high gloss protective barrier that has excellent adhesion and superior resistance to dirt and wear.  Clear Coat can be applied as a stand alone coating or apply over any of GLOBAL Encasement's products, PrepLESS Primer, LeadLock, AsbestoSafe®, MOLDon't™ or Your Last Coat to provide a high gloss, waterproof finish.
 
Clear Coat Features:
 
  • Provides additional protection from dirt, friction, and water damage
  • Extremely durable and easy to clean
  • Waterproof
  • Suitable for foot traffic areas (Apply 2 to 3 coats to achieve desired results.)

 

 

Technical Data and Properties

 
Solids by volume: 33% (+/-1%)
Weight per gallon: 8.53 lbs
Liquid appearance: Milky white
Dried appearance: Clear Finish. Glossy after 2 or more coats.
Drying time: 30 to 60 min.
Temperature Resistant to 235°F (continuous)
Flash point is >200°
VOC = 100 g/l
Cleans up easily with water
 

 

Product Installation

Clear Coat is ready to use and should not be diluted.

Apply by brush or roller, or airless sprayer.

All surfaces must be clean, dry, and free of dirt, grease, oil, or other contaminants that would interfere with proper adhesion.

Apply in temperatures between 5 0ºF and 100ºF.

Dries in 2-4 hours. Cool temperatures and high humidity can affect dry and cure time.

Follow manufacturer's application guidelines.

Easy to use and clean up is with water.

COVERAGE: Clear Coat coverage rate on a flat surface is: 200 s.f. / Gallon.  Coverage varies depending upon the porosity and texture of the surface being encased.

Spray Application: Use self-cleaning reversible spray tip, Size .015-.023
 
Brush: Use any nylon bristle brushes.
 
Roller: Use a ¾ inch nap.

 

Availability and Cost

Call GLOBAL Encasement, Inc. at  800-266-3982  for pricing and availability.

 

Warranty

 
GLOBAL Encasement, Inc. can warrant for a period of up to twenty (20) years from the date of purchase that Clear Coat is free of any defects in manufacturing. The Limited Warranty herein described shall be in lieu of any other warranty, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.
 
GLOBAL Encasement's sole liability under this Limited Warranty shall be, at its option, to replace any portion of the product proven to be defective in manufacture.
 
Any defects discovered must be reported to GLOBAL Encasement, Inc. within the Limited Warranty period, and no later than 30 days after discovery.
 
This Limited Warranty does not extend to liability for any damages due to abuse by occupants, improper maintenance, water damage, or any other causes beyond anticipated conditions and the manufacturer's control.

 

Download and Print

PDS and MSDS

 
 
 

Manufacturer

 
GLOBAL Encasement, Inc.
701 E. Santa Clara Street, Suite 12
Ventura, CA  93001 USA
PHONE:  (800) 266-3982  
FAX: (800) 520-3291