CH#280 DeCA CDC Warehouse, US Marine Corps Air Staion

 

GEI's Your Last Coat Coating

 

U.S. Marine Corps Air Station 
         Iwakuni, Japan - Central Distribution Center

 

 

 

MCAS DeCA CDC warehouse leaking roof in iwakuni japan  Warehouse Roofing Encased by GEI’s Coatings Your Last Coat

                                                                  Before                                                                                                                 After

 

The Challenge:

This large DeCA warehouse, which stores valuable goods for the US military, had a badly failing roof with over 110 documented leaks. These leaks were damaging the stored consumer products. The presence of moisture from the leaking roof was also causing harmful mold and mildew, contributing to the destruction of the warehoused products.

The GSA client looked at the overall cost of roof replacement and they found that it would be cheaper to tear down and replace the building instead of tearing off and replacing the roof, considering the relocation of personnel, stored product and building downtime involved with a roof tear off. When the GSA customer heard about GLOBAL Encasement, Inc. coating system, they chose it over a more invasive and costly roof removal and replacement.

 
GEI Seam Tape seal seams and bridged the gap  DeCA CDC warehouse rusty and leaking roof vents  CDC warehouse vents being applied with Rust Inhibiting Primer

                        GEI Seam Tape application                                                        Before                                        After applying R.I.P.™ Rust Inhibiting Primer

 

 

Benefits Desired:MCAS CDC warehouse roof with solar reflective GEI's Coatings

  • Green-Environmentally Advanced

  • Clean, Safe and Non-Toxic

  • No Building Downtime or Disruption of Services

  • Energy Star® Solar/Heat Reflective

  • Huge Energy/Money Savings

  • Mildew & Mold Resistant

  • Tight Seal, Waterproof, Durable 

  • Wind and Weather Resistant

  • Halt Rust and Corrosion

  • Sustainable, Long lasting, Renewable

  • 20-Year Warranty

 

 

Results: 

The surface preparation involved removing the loose, scaling rust with mechanical abrasion, then washing all the surfaces clean. Once everything dried, the rusty surfaces were spot treated with R.I.P.™ Rust Inhibiting Primer. All holes were then filled with Globe Caulk and the gaps were sealed with GEI Seam Tape. Finally, 32 mils DFT of Your Last Coat was applied to complete the system. Installing a nondisruptive Your Last Coat system saved considerable time and money.

 

 

 

Environmental Attributes Symbols

 

Environmental Attributes