- About Us
- About Encasement
- Case Histories
- Contact Us
Asbestos Abatement Information-Asbestos Encasement/Encapsulation
Asbestos Encasement/Encapsulation can simplify management and abatement of asbestos. Asbestos Abatement by Encasement/Encapsulation is cost effective. Information on asbestos and the management of asbestos in place is a value in itself. Find out how applying AsbestoSafe® Encasement/Encapsulation Systems can help protect building occupants from harmful exposure to friable asbestos and the dust and fibers that can be accidentally released during normal operations and maintenance procedures. Asbestos is the best fireproofing on earth and can help protect your building during a fire. Well maintained asbestos containing materials can last for the life of the building. If the building is not being demolished and there are abestos containing materials present, we always say,"Just Encase". Abatement by Encasement of asbestos makes environmental sense and saves you money.
Our Asbestos Encapsulant MPE Multi-Purpose Encapsulant has multiple uses for Encasement/Encapsulation/removal and post removal and is the most versatile asbestos encapsulant on the market today.
Delaminating Asbestos Fireproofing
When asbestos and non-asbestos spray-on fireproofing ages not only does it present the danger of exposure to mineral fibers, sometimes the fireproofing begins to delaminate. PrepLESS Primer™ applied at low pressure seals friable surfaces. Reinforcing fabric and sealant tape reattach delaminating fireproofing. Our Encasement TopCoats provide a durable Class A fire Rated surface that will last for 20 years.
Information on Asbestos Abatement by Encasement/Encapsulation and LEED-EB
LEED-EB Leadership in Energy and Environmental Design-Existing Buildings:
The use of GLOBAL Encasement's Award winning coatings solutions alone can help a building owner to achieve LEED-EB certification. Asbestos abatement is required in order to achieve LEED-EB Certification. AsbestoSafe® Encasement/Encapsulation Systems provide proven measurable results for managing asbestos in place. When GLOBAL Encasement, Inc.'s architectural green coatings purchased equal 10% or more of the total project cost points can be earned that count toward LEED-EB Certification in the catagory of optimizated use of alternative materials. Points that count towards LEED-EB Certification can also be gained in the catagories of operations/maintenance and construction/demolition/renovation waste management.
Asbestos Abatement Myths and Facts
The term "asbestos abatement" is thought to mean removal and disposal of the asbestos containing material and/or building components when in fact the term abatement refers to a lessening of the dangers and hazards associated with the asbestos containing material. Asbestos containing materials often can be managed in place with abatement methods discribed by the United States Environmental Protection Agency (EPA). There is no substitute for a good building operations and maintenance program when dealing with asbestos containing materials in buildings and your asbestos abatement program can be simplified by encasement of the asbestos containing materials with GLOBAL Encasement's super-compliant architectural green coatings solutions.
Information on Asbestos Encasement/Encapsulation Systems
GLOBAL Encasement, Inc.'s Asbestos Encasement/Encapsulation Systems are designed using environmentally friendly, low VOC, non-toxic, high performance, water-based, high quality acrylic coatings that form a tough, abuse-, rust-, mildew-, fire- and chemical-resistant, non-mercuric, waterproofing membrane to manage in place (enclose/abate) hazardous Asbestos Containing Materials, Spray-on Fireproofing, Transite and other fibrous materials including fiberglass, vermiculite or ceramic fiber. AsbestoSafe® TopCoat can be applied over PrepLESS Primer™ or our Asbestos Encapsulant MPE Multi-Purpose Encapsulant to form an AsbestoSafe® Encasement System for Asbestos Containing Materials abatement.
Information on Asbestos Containing Materials and Asbestos Abatement in the United States
Asbestos has been known for its heat and fire resistance since the Roman era. There is no better fire proofing material available today to replace the existing Asbestos Containing Materials (ACM).
The US EPA's Asbestos Project Plan dated November 2005 states:
“ Asbestos is no longer produced in the U.S., since the last domestic asbestos mine closed in 2002. U.S. consumption of asbestos peaked in 1973 at 885,000 tons. Current estimates are that approximately 3,000 tons per year of asbestos are imported for use in making goods such as roofing products, coatings, packing and gaskets, and friction products, with additional quantities of asbestos contained in manufactured goods that were imported, produced and installed in the past still present in U.S. buildings today”.
Although it is not known how much Asbestos exists in the United States infrastructure, it is a fact that the construction industry installed more than 1.4 billion square feet of Asbestos into buildings in the 1960’s alone. Asbestos has been a commonly used building material since 1880.
In 1989, the New York City Department of Environmental Protection presented the findings of a City Council commissioned study assessing the prevalence and condition of Asbestos in all public and private City buildings. Based on an extensive analysis of 900 different buildings carefully selected for a statistically valid sampling, the study estimated that 68% of all buildings in New York contain Asbestos and that 81% of the in-place Asbestos was in poor to fair condition, thereby constituting a public health risk.
Managing Asbestos Containing Materials In Place is recommended by the US EPA
In a startling reversal of existing policy, the United States Environmental Protection Agency published in June 1990 standards for managing Asbestos in buildings instead of removing the carcinogenic material. In fact, it was William Reilly, Chief EPA Administrator who said, “It is the opinion of EPA professionals that very often the best thing to do about Asbestos when you find it in your building is to manage it.” EPA chief Reilly also said that most Asbestos removal in this country is unnecessary and that Asbestos removal is inherently dangerous because it often creates more air contamination than when left alone.
All available evidence indicates that asbestos exposure at any level is hazardous to health. Asbestos causes lung cancer, fatal Asbestos, mesothelioma, emphysema and other lung diseases, plus gastric cancer from ingestion. There is strong evidence that many other cancers are associated with Asbestos exposure. Low level exposure seems to cause disease in the same proportion as high level.
The benchmark price to remove Asbestos is $25.00 per square foot. This removed material must then be replaced with an inferior fireproofing product. By managing Asbestos in place, with our AsbestoSafe® Encasement System, you can realize savings of up to 94% over the cost of removal disposal and replacement, and provide clean healthy air.
Review the EPA Guide "Managing Asbestos In Place - A Building Owner's Guide to Operations and Maintenance Programs for Asbestos Containing Materials" for more information about EPA regulations that affect asbestos management programs.
EPA Guide: Managing Asbestos In Place 20T-2003 (click to download PDF)
GLOBAL Encasement, Inc.'s AsbestoSafe® Encasement System seals in hazardous asbestos containing materials and is used for the in place management of asbestos. The AsbestoSafe® Encasement System helps to manage the asbestos in place with the application of PrepLESS Primer™ at low pressure. This minimizes the disturbance of friable asbestos and after the balance of the PrepLESS Primer™ is applied this effectively seals the asbestos containing material and hazardous asbestos fibers in place. AsbestoSafe® TopCoat is then applied to the sealed surface creating a durable AsbestoSafe® Encasement System that will last twenty years. When the AsbestoSafe® Encasement System is at the end of the service life of the coatings reapplication of AsbestoSafe® TopCoat revitalizes the system and can last for another twenty years. In cases where a penetrating encapsulant is needed to securely seal a friable substrate such as aging transite GLOBAL Encasement, Inc. recommends the use of our Asbestos Encapsulant MPE Multi-Purpose Encapsulant before application of AsbestoSafe® TopCoat. The benifits of in place management of asbestos containing materials far outweigh the prohibitive costs and lack of control inherent in asbestos removal, disposal and replacement.
AsbestoSafe® is excellent for in-place management of Asbestos Containing Materials. It is suitable for interior or exterior use for application over asbestos containing building materials on walls, ceilings, ducts, pipes and roofing. It securely seals and encases hazardous fibrous materials on structural steel (e.g. asbestos containing spray-on fireproofing). It also can be used over asbestos containing plaster, Transite and various other fibrous materials including fiberglass or ceramic fiber.
Class A fire rated
Does not affect the fireproof rating of the building
Extremely tough and durable
Mildew and mold resistant
Can be custom tinted almost any color
Solids by weight:
Solids by volume:
Weight per gallon:
Recoat After Dry To Touch:
67.4% (+/- 2%)
54% (+/- 2%)
Bright White with mild scent
To Touch: 1-4 Hours
AsbestoSafe® has an elongation of 300% and a tensile strength of 200 psi (ASTM D412), superior flexibility (ASTM D522,A), high impact resistance (ASTM D2794), and adhesion (ASTM E736). This Material is a UL Listed roofing/waterproofing coating. This material has passed ASTM E-108 (comparable to U.B.C. St’d 32-7) and meets the requirements for Class A.
AsbestoSafe® is a Class “A” Fire Rated Material and has passed ASTM E-119 testing over fireproofing insulation, ASTM E-84, E-162, and QUV G53.
This material has also passed European Standards Testing EN 13823 Reaction to fire tests for building products and EN ISO 11925-2 Reaction of fire tests – Ignitability of building products subjected to direct impingement of flame.